College of Engineering: Recent submissions

  • Design and Implementation of a Hemoglobin Concentration Meter 
    Hammad, Eman; Amraish, Nedaa; Al-amlah, Amani (جامعة بوليتكنك فلسطين - اجهزة طبية, 2008-01-01)
    اقترح فريق العمل تصميم جهاز لقياس تركيز الهيموغلوبين بالدم ليكون قادرا على اعطاء تركيز الهيموغلوبين مع تشخيص ما اذا كانت النتيجة طبيعية ام لا. الحافز لهذا المشروع كان مستندا على الرغبة في اكتساب الخبرة وتعميق فهم الاجهزة ...
  • Wheelchair Movements Controlled by Voice Commands 
    Shaheen, Raja; Qutenah, Nissrin; Idrees, Isra (جامعة بوليتكنك فلسطين - اجهزة طبية, 2012-05-01)
    A voice controlled wheelchair system is a project which aims to provide the paralysis people with wheelchair that can be controlled easily joystick or any mechanical controlling system. The requirement led understand the ...
  • biomedical solar autoclave 
    Abu Safiya, Dania; Khdoor, Alaa; Jaradat, Niveen (جامعة بوليتكنك فلسطين - اجهزة طبية, 2012-05-01)
    To protect the environment from pollution the solar energy will be used as alternative source of energy , solar energy is considered clean, economic and sustainable source of energy, in this project it will be hired in ...
  • Design of an alarm system for MRI suite 
    Dweik, Hanadi; Al-Atrash, Heba (جامعة بوليتكنك فلسطين - اجهزة طبية, 2013-06-01)
    Whit increasing use of X-ray devices for diagnostic or therapeutic purposes, and the lack of awareness among patients of the risk resulting from non-compliance with procedure and guidelines for security and safety, hospitals ...
  • Design & Implementation of An Automatic Air Bubble Removal For A Hemodialysis Machine 
    Katbeh, Mohand (جامعة بوليتكنك فلسطين - اجهزة طبية, 2012-05-01)
    The idea of the project is suggested to design and build an air bubbles detection unit by using unutilized technique by electric capacitor. The motivation for making the project is based on the desire to deepen the ...
  • Controlling the hand movement at elbow joint using EMG signal 
    Taamreh, Abdallah (جامعة بوليتكنك فلسطين - اجهزة طبية, 2012-07-01)
    The project describes the control of the prosthetic limbs for human hand movement at elbow joint, it was built to help the patients who is suffer from permanent disability in upper limbs of the body especially at elbow ...
  • Marketing using mobile via Wi-Fi 
    Nairoukh, Lubna; Baradeieh, Dalal; Al-Muhtaseb, Marwa; Najjar, Ayat (جامعة بوليتكنك فلسطين - اتصالات, 2012-06-01)
    We have completed this project in order to work on providing application which makes shopping easier and smoother , by using a wi-fi localization system, where the location is determined by the network infrastructure . ...
  • Portable water mist fire extinguishing using pressurized air 
    Mtour, Mohammed; Alawawde, Mazen; Arjan, Khalil; Alaraj, Ahmad (جامعة بوليتكنك فلسطين - كلية الهندسة - ميكانيك, 2012-10-01)
    The progress on the research and application of portable fire fighting system in fire suppression has been substantial over the last decade. To bring this work into focus, a review has been undertaken to identify future ...
  • Bioelectric Impedance Measurements 
    Al-Amleh, Nehal; Al-Nanasra, Nadia; عبد الله, عرمان (جامعة بوليتكنك فلسطين - اجهزة طبية, 2007-01-01)
    Bioelectric tissue impedance measurement to determine or infer biological information has a long history dating back to before the turn of the century . BEI measurements are commonly used in, cardiac measurement , body ...
  • Design , Building and Testing of Thermoelectric Refrigeration Apparatus Driven By Solar Energy 
    Shalaldah, Wisam (جامعة بوليتكنك فلسطين - كلية الهندسة - ميكانيك, 2019-05-01)
    Refrigeration has become indispensable as it enters into various fields of life such as food preservation and distribution, and production processes . As a result of the increasing and continuous demand for refrigeration ...
  • Simulation and Analysis of a Vehicle Chassis by ANSYS Program 
    Hasan, Mohammad; Abo Al-kibash, Taqi (جامعة بوليتكنك فلسطين - كلية الهندسة - ميكانيك, 2019-05-01)
    Automotive chassis, is the most important part of an automobile. The chassis serves as a framework for supporting the body and different parts of the vehicle, so it should be rigid enough to withstand the shock, twist, ...
  • Power Generation Using Hydraulic Speed Bump 
    Natsheh, Mountaser; Abumarkhia, Mo’min (جامعة بوليتكنك فلسطين - كلية الهندسة - ميكانيك, 2019-05-01)
    Electrical energy is essentially required for society as well as all-round development of any country. The growing demand of electrical power for different activities has forced scientists and researchers to develop ...
  • Calculation and Matching a Turbocharger 
    Khatib, Husam; Joulani, Bara' (جامعة بوليتكنك فلسطين - كلية الهندسة - ميكانيك, 2019-12-01)
    Internal Combustion engines are considered the most famous Source of energy that is used in water and land vehicles and some trains. And From the early years of discovering this source there was a tough competition ...
  • Inverted Pendulum Robot 
    Barari, Anan; Zoghier, Ahmad (جامعة بوليتكنك فلسطين - كلية الهندسة - ميكانيك, 2018-12-01)
    inverted pendulum robot is an applied research project for the design, analysis and construction of an electric robot with two parallel wheels. The robot works to maintain its balance. The robot accelerates forward and ...
  • Reverse Engineering for Gearbox 
    Sultan, Sultan; Alsaid, Fuad (جامعة بوليتكنك فلسطين - كلية الهندسة - ميكانيك, 2019-12-01)
    Reverse Engineering in terms of mechanical engineering is the process of extracting knowledge or design of information and re-producing it based on the extracted information. The process usually includes a 3D scanning ...
  • Enhancement of the Engine Acceleration by Using Intake Manifold Boosting of Spark -Ignition Engine 
    abu sharkh, imad; salhab, Alaa (جامعة بوليتكنك فلسطين - كلية الهندسة - ميكانيك, 2020-01-01)
    Intake manifold Air injection is a widely used approach to reduce the fuel consumption and improve acceleration performance of spark - ignited engines while retaining the maximum power output. Significant part of engine ...
  • Building A Solid-State Refrigerator Using Thermoelectric Cooler 
    Sarahneh, Shadi; Al-Himony, Momen (جامعة بوليتكنك فلسطين - كلية الهندسة - ميكانيك, 2019-12)
    The goal of this project is to build solid-state refrigerator that can be imbedded inside vehicle and passenger compartment using Thermoelectric Cooler (TEC). Its main aim is to help people who need cooler for their ...
  • Automatic Wood Plates Painting Machine 
    Hashlamon, Osama; Burqan, Basel; Nuaimi, Mohammad; Gaith, Iyad (جامعة بوليتكنك فلسطين - كلية الهندسة - ميكانيك, 2019-05-01)
    The purpose of this project is to design and produce a machine that can paint any type of wooden plates using spray painting technique. The wooden piece is inserted, and the paint type is specified, the machine is painted ...
  • Voice Controlled Robot 
    Al-shweiki, Anas; Salameen, Nouman (جامعة بوليتكنك فلسطين - كلية الهندسة - ميكانيك, 2019-05-01)
    The purpose of robotics in commercial intention has come to be quite essential for executing challenging work into more conveniently simple way. There are a lot of researches working on to enhance the connection between ...
  • Detection of Minor Cooling Water leakage Using Non-Reactant Chemicals in ICE 
    Turman, Ahmad; Houshiya, Mohammad (جامعة بوليتكنك فلسطين - كلية الهندسة - ميكانيك, 2020-08-01)
    The project aims to determine the source of undetectable water leakage in the vehicles so that the consumption can be in the engine or from other sources, by adding chemical elements to the water in the radiator, detect ...

Search DSpace


Browse

My Account