College of Engineering: Recent submissions

  • Smart Assist System for Blind People 
    Barmil, Abed Alrhman; Tamimi, Ahmad; Fararjeh, Ahmad (جامعة بوليتكنك فلسطين - اجهزة طبية, 2014-12-01)
    This project presents an electronic smart navigation system for visually impaired and blind people. This system detects obstacles around the user in front, left and right direction using a network of ultrasonic sensors. ...
  • Design of Portable Medical System for Monitoring and Treating Sleep Apnea 
    Farash, Hadeel; Fanoun, Israa; Al - Shareef, Ruba (جامعة بوليتكنك فلسطين - اجهزة طبية, 2016-05-01)
    The idea of this project is to design a medical system which has the ability to diagnose sleep apnea, and help the patient to wake up by activating an alarm system, and apply reflexology therapy to patient simultaneously. A ...
  • Preparation of Polycaprolactone Nanoparticles Using Nanoprecipitation Technique 
    Ahmro, Sajida; Abu Farah, Salam (جامعة بوليتكنك فلسطين - اجهزة طبية, 2016-05-01)
    تعرف الجزيئات النانوبولمرية على انها جزيئات ال يتعدى قطرها 100 نانومتر , و يتم استخدامها في تطبيقات عديدة من ضمنها التطبيقات الطبية مثل تحميل الدواء . الجزيئات النانوبوليمرية تستخدم في نظام توصيل الدواء و ذلك النها تتميز ...
  • Acid Base Conductivity Meter For Biomedical Solution 
    Al-hajajrah, Mohammad; Hilal, Mohannad (جامعة بوليتكنك فلسطين - اجهزة طبية, 2004-06-01)
    Following the importance of pH in many fields especially in medicine, chemistry, and many other fields. The pH measurement is considered as one of the most popular lab.measurements. pH measurement of the blood is done ...
  • Interface Module For Monitoring ECG Signal and Temperature 
    Estetah, Abd Ull-raheem; Othman, Osama; Odeh, Islam (جامعة بوليتكنك فلسطين - اجهزة طبية, 2004-06-01)
    This project describes the design and implementation of the Interface Module for monitoring ECG signal and temperature (IM). This Module is a flexible interface to communicate sensor data such as biomedical signals – ...
  • Experimental Board for Biomedical laboratory 
    Al-Aloul, Yousef; Al-Trawa, Bashar; Abu-Na'meh, Raid (جامعة بوليتكنك فلسطين - اجهزة طبية, 2004-07-01)
    In this project we will design and implement an experimental board for the biomedical laboratory .It includes circuits as (op amp, instrument rectifier ,low pass filter, high pass filter, comparator-Schmitt trigger ...
  • Designing of Respiratory Monitoring System Using Impedance Plethysmography 
    Amro, Ahmad; Al khatib, Moayyad (جامعة بوليتكنك فلسطين - اجهزة طبية, 2006-06-01)
    Functionally, the respiratory system composed of an integrated set of regulated processes that include pulmonary ventilation (breathing) and gas exchange in the lungs. Under normal conditions, ventilation occurs spontaneously ...
  • DESIGN OF LIQUID SUBSTANCE CONCENTRATION USING LIGHT ABSORPTION TECHNIQUE 
    DAGHAMEEN, BASSAM; NU'EIRAT, BILAL; SHALABI, SAEED (جامعة بوليتكنك فلسطين - اجهزة طبية, 2006-06-01)
    The "Design of Liquid Substance Concentration Using Light Absorption Technique" is using light absorption property of the liquid substances to measure elements concentrations in blood and urea. A light measuring technique ...
  • DESIGN OF BAND-SELECTIVE REPEATER 
    Taneneh, Malak; Awwad, Ahmad; Haddad, Majdi (جامعة بوليتكنك فلسطين - اتصالات, 2014-12-01)
    The intended project is a design, simulation and hardware implementation of a cellular repeater .This cellular repeater can be operated in GSM900 band to rectify the problems of poor signal service inside buildings. We ...
  • In Building Penetration Loss in Commercial and Residential Building Structures in Palestine 
    Amro, Obaida; Awad, Belal; Melhem, Motasem (جامعة بوليتكنك فلسطين - اتصالات, 2010-05-01)
    Mobile users may experience many problems when using their handsets inside buildings. This is due to lack of adequate in building coverage which would result into bad quality calls, drop calls, interference noise, to say ...
  • Smart Security System Based on Wireless Sensor Network and Third Generation Technology 
    Tamimi, Duaa; Zamareh, Samah; Balassi, Sabrin; Zaareer, Nidal (جامعة بوليتكنك فلسطين - اتصالات, 2014-06-01)
    This project is developed and implemented as an integrated wireless sensor system; it is specialized in safety and security issues in buildings, in order to protect it from risks before they happen, or at least to minimize ...
  • Remote control of three dimensions crane 
    Hassan, Mohammad; Ibrahem, Yzeed (جامعة بوليتكنك فلسطين - اتمتة صناعية, 2004-06-01)
    Crane is a hoisting machine which used for lifting heavy loads and transferring them from one place to another. Three-dimensions crane has a wide usage, where 90% of industry application used this type machines, however, ...
  • Dual Converter with Power Transistor and Speed Control for DC Motor 
    Amer, Amjad; Dweikat, Mahmoud (جامعة بوليتكنك فلسطين - هندسة حاسوب, 2004-06-01)
    Some cases need operating the machine in the four quadrant for high power application, and speed control of dc motor so the dual converter is used, Also we will put in this project the ability of changing the flow of ...
  • Development of Hebron Medium Voltage Electrical Network by Using the Simulator Program 
    Alzaro, Fuad; Salhab, Anas (جامعة بوليتكنك فلسطين - اتمتة صناعية, 2004-06-01)
    This project is studying of the medium voltage electric power network of Hebron city by using the Power World Simulator (Simulator) program and making the essential developments and improvements on the network such ...
  • POWER FACTOR CORRECTION AT INDUSTRIAL APPLICATIONS 
    AL-ADAM, KHALAF; HASHEESH, SALEM (جامعة بوليتكنك فلسطين - اتمتة صناعية, 2004-06-01)
    Most industrial loads (motors, lights, etc.) are inductive in nature, so they have a lagging power factor. Therefore, these loads draw more current (apparent power) than is required to do the actual work (real power). ...
  • Frequency Converter with Multilevel Voltage Source Inverter 
    Al-Qaisi, Imad; Dahman, Alaa (جامعة بوليتكنك فلسطين - اتمتة صناعية, 2004-06-01)
    Some systems need a three phase AC source with variable voltage and frequency so the frequency converter is used. However, use of frequency converter is becoming popular in the recent years for speed control of AC motors. ...
  • Correction of Consumed Power By Electrical Machines at Starting 
    ARAR, MOHAMMAD; ALQADI, OMAR (جامعة بوليتكنك فلسطين - اتمتة صناعية, 2004-07-01)
    In this graduation project we make study and research for factories and industrial plant in Hebron to detect power consuming during production process and specially through starting these machines. Then, try to create ...
  • Design and Build of Single-Phase AC PM Synchronous Motor 
    JUBER, ANAS; ABDEEN, MUATH; ISIEED, MOATAZ (جامعة بوليتكنك فلسطين - اتمتة صناعية, 2008-06-01)
    In this project the method of designing a Single Phase Permanent Magnet (SPPM) Synchronous motor is presented. This motor has special design of stator and rotor. It is commonly used in low-power application. The behavior ...
  • STAND ALONE HYBRID POWER SYSTEM 
    ARORI, ALI; ASFOUR, ASHRAF; HIJAZI, ADI (جامعة بوليتكنك فلسطين - اتمتة صناعية, 2010-05-01)
  • Plastic Bottles Collection machine 
    Qaoud, Ahmad; Qutaina, Ramzi (جامعة بوليتكنك فلسطين - اتمتة صناعية, 2014-06-01)
    The plastic materials are very hard to decompose in the nature, products using plastic package increase rapidly without any official or industrial recycling efforts, and that will leads to spoil the soils and environment. our ...

Search DSpace


Browse

My Account