Graduation Projects, Theses, and Student Papers: Recent submissions

  • Linear and non-linear control for an Inverted Pendulum Applied to model “ECP 505” 
    Halaiqa, Ammar; Hroub, Ibrahim (جامعة بوليتكنك فلسطين - كلية الهندسة - ميكانيك, 2014-06-01)
    The inverted pendulum represents a challenging problem in control and it has been widely used to investigate and develop new control strategies that can effectively deal with nonlinearities. The “Inverted Pendulum ECP model ...
  • DESIGN AND BUILDING A SMALL WIND ENERGY CONVERSION SYSTEM 
    Sultan, Mohammad; Al-Tamimi, Basil (جامعة بوليتكنك فلسطين - كلية الهندسة - ميكانيك, 2003-09-01)
    This graduation project aims at designing, building and setting an optimal small wind energy conversion system that would utilize the available wind energy and convert it into electrical power energy. This small power ...
  • Design of an Air conditioning System for Abu-al-hassan Al-Qasem (Yatta) Governmental Hospital 
    Ikhawi, Abdullah; Daoud, Fuad (جامعة بوليتكنك فلسطين - كلية الهندسة - ميكانيك, 2004-06-01)
    The purpose of the project is estimation of cooling(summer) and heating(in winter) loads for Yatta governmental hospital to select the suitable and economical air conditioning system/s. The hospital is located in the ...
  • Design of mechanical system for a hospital in Hebron 
    Asafra, Diya; Amayreh, Mousa (جامعة بوليتكنك فلسطين - كلية الهندسة - ميكانيك, 2013-12-01)
    This project deals with the design of mechanical systems for a hospital in hebron city which consists of four stories with a total area of 10.000m2>
  • building tilt table ratio unit ( TTR ) 
    Awawdeh, Alqassam; Alsharef, Ashraf; Nassar, Muath (جامعة بوليتكنك فلسطين - كلية الهندسة - ميكانيك, 2014-06-01)
    في هذا المشروع تم تصيمي وحدة فحص زاوية تدحرج المركبة جانبيا في حالة الوقوف التام وتم بناء نموذج مصغر للمشروع ولقياس الزاوية سيتم استخدام المقاومة المتغيرة وتم استخدام وحدات لقياس الوزن لقياس التصاق العجلات الخارجية مع ...
  • Intelligent traffic with automatic violation system 
    Baradia, Khalid; Jaabary, Abdullah; Jaafreh, Hassan; Zaitown, Mustafa (جامعة بوليتكنك فلسطين - كلية الهندسة - حاسوب, 2013-05-01)
    This project aims to plan and build a system to reduce the number of vehicle accidents happening every day due to the illegal speed. System will present a model for vehicles speed monitoring, and sending violation reports ...
  • Design and building of a driver for atmospheric water vapor harvesting utilizing solar energy 
    Sarsour, Suhaib; Aweida, Muhannad (جامعة بوليتكنك فلسطين - كلية الهندسة - ميكانيك, 2015-04)
    act كي یصبح مصدرا ً ً ا من الماء في الساعة, وقد تم بنا وتجربة الجھاز في مدینة ً الشمسیة. لقد تم تصمیم ھذا الجھاز كي ینتج ما یزید عن نصف لتر تم الحصول علىالخلیل وقد النتائج المتوقعة. IV على تبرید الھواء باستخدام دورة ...
  • technical and economic aspects of solar Pool heating 
    Shawaheen, Mohammad; Haltam, Omar (جامعة بوليتكنك فلسطين - كلية الهندسة - ميكانيك, 2015-12-01)
    the project have a design of swimming pool and solar heating system for a building in hebron city, the total area of this pool is 178m2, the design have the solar collector network and comparison between the solar and the ...
  • Solar adsorption Ice maker 
    Qabaja, Hassan; Al-Quoqa, Mahmoud (جامعة بوليتكنك فلسطين - كلية الهندسة - ميكانيك, 2013-05-01)
    Our project is building, designing, and testing an ice maker machine, this machine uses the solar energy ( radiation from the sun).
  • Energy Auditing for an Industrial Premises 
    Qasrawi, Amjad; Yasin, Talat (جامعة بوليتكنك فلسطين - كلية الهندسة - ميكانيك, 2009-06-01)
    In order to attain the best energy efficiency in an industrial plant, an energy audit is a prerequisite process for identifying the general energy consumption condition and to hence identify the measures that need to be ...
  • Self-Balancing Unicycle System on Rough Road 
    Abuzer, Ahmad; Tartory, Hussain (جامعة بوليتكنك فلسطين - كلية الهندسة - ميكانيك, 2009-06-01)
    This system represents a mechatronic system, which contains all the essential components, to be considered a complete mechatronic system. In addition to that, this system represents a challenge in control and implementation, ...
  • "Design and Implementation of Balance Testing Machine for Grinding and Cut-off Wheels " 
    Amayreh, Mohammad; Albakri, Mohammad (جامعة بوليتكنك فلسطين - كلية الهندسة - ميكانيك, 2010-06-01)
    In this project a device for measuring unbalance in cutoff and grinding wheels that are manufactured in the factory of JELANCO has been implemented successfully, in addition to determining the value of the unbalance in a ...
  • تصميم آلة بوشار أتوماتيكية AE99 
    نصار, محمود (جامعة بوليتكنك فلسطين - كلية الهندسة - ميكانيك, 2010-06-01)
  • Design of Mechanical System for Hospital in Birzeit City 
    Kabaja, Mahmoud; Salih, Abdulla; Abo omeir, Ahmad (جامعة بوليتكنك فلسطين - كلية الهندسة - ميكانيك, 2010-06-01)
    This project deals with the design of mechanical systems for a hospital in Bier zait city which consists of eight stories with a total area of 9000 [m2]. Mechanical systems include heating, ventilation and air ...
  • Assessment of Traffic Induced Pollution and Dispersion in Al-Salam Main Road 
    Al Qadi, Mohammed; Al Atawneh, Zeyad; Al Natsheh, Sufian (جامعة بوليتكنك فلسطين - كلية الهندسة - ميكانيك, 2010-12-01)
    The proposed graduation project addresses a major air pollution problem in Hebron city and mainly in a highly traffic dense road which is Al-Salam Road. The road connects the northern part of Hebron city with it southern ...
  • Modeling and control of articulated hydraulic manipulator 
    Daana, Shadi; Hirbawi, Saed; Asha, Khalid (جامعة بوليتكنك فلسطين - كلية الهندسة - ميكانيك, 2010-06-01)
    The articulated hydraulic manipulator is a vertical artculated robot with three revolute joints with gripper attached, the robot has three gegree of freedom . each joint in this robot is driven by hydaulic actuator, this ...
  • Treatment of Green house effect in glass dome of “Fawzi Kawash Center” 
    Al-Tell, Talab (جامعة بوليتكنك فلسطين - كلية الهندسة - ميكانيك, 2010-06-01)
    The project aims to study the problem of Green house effect in the glass dome of building of “Friends of Fawzi Kawash IT Center of Excellence” That belongs to Palestine Polytechnic University, and offer solution for this ...
  • Designing and Building of Thermal Fatigue Testing Machine for Stone 
    Shawer, Mou'th; Hassounh, Yehya (جامعة بوليتكنك فلسطين - كلية الهندسة - ميكانيك, 2010-06-01)
    This report summarizes the experimental, design, and modeling work that was performed in this project for developing a thermal fatigue test for stone. This project helps the Palestinian stone industry by providing a tool ...
  • Building And Design Of Hydraulic Hybrid Vehicle 
    Mraish, Abd Almajed; Al_heimuni, Rabee' (جامعة بوليتكنك فلسطين - كلية الهندسة - ميكانيك, 2010-06-01)
    This project comes as a response to the modern trends In the automotive world ,and developed of hybrid technology, which could be summarized into to improving both fuel efficiency and overall operating economy of vehicles. ...
  • Developing psychrometric chart for Palestine main locations using matlab soft ware computer program 
    Al-zabadeia, Akram (جامعة بوليتكنك فلسطين - كلية الهندسة - ميكانيك, 2010-06-01)
    Air conditioning is very important in our life now. It basically depend on the psychrometric processes and psychrometric chart, this project idea is to developing anew psychrometric chart for different metrological location ...

Search DSpace


Browse

My Account