Design and implementation of CNC stone engraving machine
| dc.contributor.advisor | Iqteit, Nassim | |
| dc.contributor.author | Qabajat, Muayad | |
| dc.contributor.author | Aljabari, Mokhtat | |
| dc.date.accessioned | 2020-01-22T07:50:24Z | |
| dc.date.accessioned | 2022-05-22T06:48:49Z | |
| dc.date.available | 2020-01-22T07:50:24Z | |
| dc.date.available | 2022-05-22T06:48:49Z | |
| dc.date.issued | 2013-05-01 | |
| dc.description | no of pages 85 , 26426, اتمتة صناعية 2/2013 , in the store | |
| dc.description.abstract | This project discusses the CNC machines structure and its purpose of existence, and then it shows the designing and Implementing procedure of this machine starting from making a theoretical designation and selecting parts of the project and ending with arranging its working status. This report contains an introduction that describes the machine in general , the next chapter describes the hardware components used in the machine, the third chapter describes the software used to operate the machine and the fourth chapter includes the selection of the servo motor and equipment of the machine , and the working procedure to implement the machine. We work through some programs electrician and mechanical simulation system to represent the work of the machine using the computer, because of the lack of support for the implementation of this project, and were able to represent the work of the machine and use microcontrollers to control the engraving motor which is drilling and drawing on the work piece. | en_US |
| dc.identifier.uri | http://localhost:8080/xmlui/handle/123456789/7052 | |
| dc.language.iso | en | en_US |
| dc.publisher | جامعة بوليتكنك فلسطين - اتمتة صناعية | en_US |
| dc.subject | CNC stone | en_US |
| dc.subject | engraving machine | en_US |
| dc.title | Design and implementation of CNC stone engraving machine | en_US |
| dc.type | Other | en_US |