Abstract:
We used arduino(microcontroller) to control many devices(lighting system, socket,
and charger), by give commands to microcontroller through smart phone or through
human sensor that connect to the microcontroller ( the sensor disconnect the
lighting system when nobody exist in the house), also give commands from smart
phone to socket and charger to connect or disconnect the relay that feeds it.
The project contains smart door lock system that can open it by using fingerprint
sensor that connect to the microcontroller, the sensor response only for the
fingerprints that defined previously or can open it using normal key.
The project also contains security system by using motion sensor that connect to the
microcontroller that works through gives sound using buzzer when anybody enter
the house from the entrance of the door.
The project Computes energy consumption through LabVIEW program , also
contains protection system that disconnect the electricity from all house when the
current more than the desired value that you identified it previously , the program
also used to display the current and the voltage and socket state and the door state
and the lighting state and the charger state and the human detection state .
الملخص:
عبارة عن نظام يستخدم فيو االردوينو)متحكم دقيق ( لمتحكم في العديد من االجيزه ) كإالضاءة واألباريز
والشاحن ,( ويتم إعطاء األوامر لممتحكم من خالل الياتف الذكي أو من خالل المجس الخاص باإلنسان
المتصل مع المتحكم ) حيث يقوم بفصل ووصل االناره في حال عدم وجود إنسان بالمكان ( أو من خالل
المفتاح لإلنارة أو يتم إعطاء األوامر من خالل الياتف الذكي لإلبريز والشاحن ونظام قفل لمباب يفتح عن طريق
قارئ البصمة الموصول مع المتحكم ويوجد كذلك نظام حماية يعمل بدخول احد إلى المكان عن طريق مجس
الحركة المتصل بالمتحكم حيث يتم تفعيل اإلنذار من قبل صاحب المنزل عن طريق الياتف الذكي وقت ما شاء
ويتم حساب كميو الطاقة المستيمكة من خالل (LabVIEW) ويتم تحديد قيمو التيار القصوى التي يجب سحبيا
حيث إذا زاد عن ىذه القيمة يقوم البرنامج بفصل الطاقة عن المنزل وكذلك يمكن لو عرض قيم الجيد والتيار
والقدرة وفصل ووصل الكيرباء عن المنزل من خالل البرنامج , وبمكن لو أيضا عرض حالة الباب واإلضاءة
والمقبس والشاحن وكذلك عرض وجود شخص في الغرفة من عدمو .