dc.contributor.advisor |
Al - Maghalseh, Maher |
|
dc.contributor.author |
Shakarna, Muhamad |
|
dc.contributor.author |
Abu Awwad, Bilal |
|
dc.contributor.author |
Jawabra, Muhamad |
|
dc.date.accessioned |
2018-10-28T06:40:53Z |
|
dc.date.accessioned |
2022-05-19T11:16:22Z |
|
dc.date.available |
2018-10-28T06:40:53Z |
|
dc.date.available |
2022-05-19T11:16:22Z |
|
dc.date.issued |
2016-01-01 |
|
dc.identifier.uri |
http://localhost:8080/xmlui/handle/123456789/6322 |
|
dc.description |
CD, no of pages 99, 30147,1/2016طاقة, in the store |
|
dc.description.abstract |
Abstract
This project concerns the simulation of Renewable Energy Lab at Palestine Polytechnic University. A simulation is done by deriving the equations of each module used in the lab, and simulated as blocks using MATLAB/Simulink. The modules considered are (Power circuit breaker, Maximum power demand, Transmission lines, Loads, Three phase induction generator, PV module, and Inverter module).
Complete design of Renewable Energy Lab was carried out. The design consist of the electrical modules that mentioned earlier, and the modules simulated stand alone to achieve the final form.
Finally several experiments on MATLAB and also practical are done, and a comparison between the results is obtained. After obtaining the comparison, a results validation is done. |
en_US |
dc.language.iso |
en |
en_US |
dc.publisher |
Palestine Polytechnic University - طاقة |
en_US |
dc.subject |
Modeling, of Smart Grid ,Lab Using ,MATLAB/Simulink |
en_US |
dc.title |
Modeling of Smart Grid Lab Using MATLAB/Simulink |
en_US |
dc.type |
Other |
en_US |