DSpace Repository

Heavy metal- Wastewater Treatment from Galvanization Industry Using Nanoadsorbent

Show simple item record

dc.contributor.advisor Sawalha, Hassan
dc.contributor.author Tamimi, Inaam
dc.contributor.author Shaheen, Mais
dc.contributor.author Zahraa, Tamimi
dc.date.accessioned 2018-10-24T06:01:30Z
dc.date.accessioned 2022-05-19T11:16:07Z
dc.date.available 2018-10-24T06:01:30Z
dc.date.available 2022-05-19T11:16:07Z
dc.date.issued 2016-01-01
dc.identifier.uri http://localhost:8080/xmlui/handle/123456789/6304
dc.description CD, no of pages 58, 29343, 1/2016 بيئة , in the store
dc.description.abstract Galvanization industry generates wastewater that is mainly contaminated with heavy metals including (Fe, Cu, Mn, Pb, Cd, Zn, Co, Cr, Mg, Ni). In Palestine the wastewater from this industry is usually discharged into the empty land or sewer system without any treatment. This study aim at investigating the use of magnetic nanoadsorbent for the removal of heavy metals particularly Zn from the wastewater. Samples of wastewater were collected from different rinsing tanks in galvanization process at different time intervals, and their properties including PH, E.C, TDS, Turbidity, and concentration of elements were measured. The result showed that the wastewater is highly contaminant with heavy metals. The characteristic test of wastewater were varied according to the sequence of galvanization process; samples collected from the rinsing tank after acidic treatment has the lowest pH and highest turbidity, whereas samples collected from rinsing tank after fluxing tank has the highest pH and Zn concentration. Batch adsorption experiments were performed for Zn removal from real samples and model solutions (ZnCL2, ICP standard solution, and Zn(NO3)2) by using iron oxide magnetic nanoparticles as adsorbent. Effects of initial concentration and pH on the adsorption were investigated using Inductively Coupled Plasma device (ICP). The result was obtained using model solutions (ZnCl2 and Zn(NO3)2) were not reproducible to the metal solution instability. Where the results obtained from the adsorption on real samples were highly reproducible and a Zn removed up to 93% was achieved in less than ten minutes of adsorption. The adsorption process of wastewater favorable at high pH value and the optimum value was 10. The main conclusion of the present study is that galvanization wastewater industry should be property treatment before being discharge and adsorption method with nanoparticles could be effectively used for removal of heavy metals for wastewater. en_US
dc.language English
dc.publisher Palestine Polytechnic University - بيئة en_US
dc.subject Heavy ,metal- Wastewater ,Treatment from Galvanization Industry ,Using Nanoadsorbent en_US
dc.title Heavy metal- Wastewater Treatment from Galvanization Industry Using Nanoadsorbent en_US
dc.type Other en_US


Files in this item

This item appears in the following Collection(s)

Show simple item record

Search DSpace


Browse

My Account