College of Engineering: Recent submissions

  • Melhem, Tareq; Abulehia, Anas (Palestine Polytechnic University , mechanical engineering , mechatronics, 2016-05-31)
    Our graduation project is 2-DOF Vertical Planner Manipulator, simply the manipulator has do two main functions, first one is perform any 2-D sketch in vertical plane, second one is to be able to repeat a predetermined motion ...
  • Shalalfeh, Sohaub; Jaber, Ihab; Hroub, Ahmad (Palestine Polytechnic University , mechanical engineering , mechatronics, 2016-05-31)
    Most of the functions of a modern car directly depend on reading sensors spread over parts of the engine to adjust the efficiency and performance of the engine.These sensors have an important piece of information for the ...
  • Ta'amra, Mu'min; Khalid, Obayda (Palestine Polytechnic University , mechanical engineering , mechatronics, 2017-05-31)
    One of the most important pillars of community development is to improve the healthcare section. This includes facilitating the access to medications and drugs for all people and over the time. However, many people still ...
  • Shalalldah, Aseel; Waara, Hadeel; Albisher, Mohammad; Ayaydah, Wesal (جامعة بوليتكنك فلسطين , كلية الهندسة - مساحة, 2017-05-31)
    Beit Jala city like the other Palestinian cities, which are suffering from water scarcity due to conditions of water supply, which is limited, the study aims to design a system for on demand supply for Beit Jala region, ...
  • Muharram, Rami; Mujahid, Ashraf; Al-Baw, Mohammed (Palestine Polytechnic University - Department of Mechanical Engineering, 2017-06-01)
    Abstract The development of vehicles with internal combustion engine, especially automobiles, is one of the greatest achievements of modern technology. Automobiles have made great contributions to the growth of modern ...
  • Othman Aljamal, Mohammed (Palestine Polytechnic Universityجامعة بوليتكنك فلسطين , كلية الهندسة , ميكانيك, 2017-05-31)
    Exhaust gas pollutants emitted to the atmosphere are seriously considered to be hygienic and environmental risk. This project responds to environmental and humanity needs to reduce the concentration of the toxic emissions ...
  • Moqadi, Mostafa; Berghith, Moath; Zalloum, Mohammad (جامعة بوليتكنك فلسطين , كلية الهندسة , ميكانيك, 2017-05-31)
    Reverse Engineering in terms of mechanical engineering is the processes of extracting knowledge or design information from anything and re-producing it based on the extracted information. The process usually includes a ...
  • Aldweik, Suhaib; Shweiki, Abdulaah (جامعة بوليتكنك فلسطين , كلية الهندسة , ميكانيك, 2017-05-31)
    Stone and marble sector is one of the most important industrial and commercial sectors in Palestine since the area is rich with this high quality natural resource. It was given the name of (white gold) for its weight in ...
  • Makhlouf, Nakhleh; Alian, Ibrahim; Abuawwad, Ibrahim (جامعة بوليتكنك فلسطين , كلية الهندسة , ميكانيك, 2017-05-31)
    This project aims to make a feasibility study for using the Linear Fresnel Collector system in plastic industry. System has been chosen after studying the current situation of the solar radiation in Palestine and the thermal ...
  • Amayrah, Mohammad; Khamayseh, Ahmad; Sayarah, Ahmad; Aljabari, Saad (جامعة بوليتكنك فلسطين , كلية الهندسة , ميكانيك, 2017-05-31)
    The project is aimed to determine the source of water leakage in vehicles, in which the source of lack may be from engine or not, and that by the determination of the percentage of water which goes out with exhaust gases ...
  • Sharif, Mosab; Latayfa, Adham; Yahya, Mohamad (جامعة بوليتكنك فلسطين , كلية الهندسة , ميكانيك, 2017-05-31)
    This project aims to design the mechanical systems for Ibn sina specialist hospital which is located in Jenin city . This building consist of seven floors with total area of 17000 m 2 . The design of this project include ...
  • Awwad, Mariam; Abu Zahra, Mohammad (Palestine Polytechnic University , electrical engineering , power engineering, 2017-05-31)
    Energy sources such as solar power can be used to perform the work , the work obtained by use of sunlight concentrated on a fluid running in a tube, then the thermal energy resulted which can be converted to mechanical or ...
  • Abu Al-Seba, Yazeed; Ghannam, Youssef; Abu-Qarandal, Bahaa (ppu , electrical engineering, 2017-05-31)
    This project is a Design of High Voltage Transmission system with 161KV and 1GW between Hebron and Al Ezaria City using E-TAP Simulator, assessment program, and tools. The core of the project is to Study, Calculate and ...
  • Salamin, Mohammad; Abu-Sabha, Khaleel (Palestine Polytechnic University , electrical engineering, 2017-05-31)
    In recent years, there has been a big and rapid development in the communication and network industry. To be more specific, there has been a big and tremendous growth in the technologies of wireless local area networks ...
  • Katbeh, Alaa; Rayyan, Saleem; Qafesheh, Fayez (Palestine Polytechnic University , electrical engineering, 2017-05-31)
    Palestinian electrical power distribution companies nowadays are trying to seek to not rely on imported electricity from Israeli generation companies. Due to the importance of the up-mentioned case, studying the power ...
  • Alzeghari, Batoul; Torman, Rana; Qudimat, Yazan (Palestine Polytechnic University , electrical engineering, 2017-05-31)
    Photovoltaic inverter, that is the heart of PV systems, which is take (20 – 25)% total cost of PV system which is in charge of electric power conversion from DC to AC. Due to the multiplicity types of inverters, which ...
  • ادعيس, وعد; الحيح, بلال; صلاحات, سامح; دنديس, عبد الرحمن; الشامسطي, اسامة (جامعة بوليتكنك فلسطين - كلية الهندسة - مباني, 2016-06-01)
    التصميم الإنشائي هو أهم التصميمات اللازمة للمبنى بعد التصميم المعماري، فتوزيع الأعمدة والأحمال والحفاظ على المتانة وبأفضل الأسعار وأعلى درجات الأمان يقع على عاتق المصمم الإنشائي, و في هذا المشروع سنقوم بعمل تصميم إنشائي ...
  • Aburaiya, Bahaa; ALkhdour, Qassam (ppu , electrical engineering, 2017-05-31)
    The project is to present offer proposal complete study of the medium voltage electrical network in Bani Na’im town near Hebron. The study methodology is to collecting data and information needed to discover the network ...
  • Aburayieh, Mohammad; Tamimi, Hashim; Salman, Nisreen (ppu , electrical engineering, 2017-05-31)
    Abstract The idea of the project is to design transmission line system for all of the west bank from north to the south. The appropriate design for towers, conductors, insulators has been done as well as for ...
  • عابدٌين, باسل; ابورجب, معن; حجازي, يزن (جامعة بوليتكنك فلسطين - كلية الهندسة - مباني, 2016-06-01)
    يمكن تلخيص هدف المشروع في عمل التصميم الانشائي لجميع العناصر الانشائية التًي يحتويها .المشروع، من عقدات وجسور وأعمدة وأساسات وجدران وغيرها من العناصر الانشائٌية. يتكون المشروع من مبنى متعدد الاستخدامات , يحتوي خمسة طوابق ...

Search DSpace


Browse

My Account