DSpace Repository

Browsing College of Engineering by Title

Browsing College of Engineering by Title

Sort by: Order: Results:

  • Melhem, Tareq; Abulehia, Anas (Palestine Polytechnic University , mechanical engineering , mechatronics, 2016-05-31)
    Our graduation project is 2-DOF Vertical Planner Manipulator, simply the manipulator has do two main functions, first one is perform any 2-D sketch in vertical plane, second one is to be able to repeat a predetermined motion ...
  • Sbaih, Haytham; Jahalien, Mohammad; Abu Zir, Yahia; Zuhdi Salhab (جامعة بوليتكنك فلسطين , كلية الهندسة , ميكانيك, 2015-05-31)
    The emission problem is one of the most interesting challenges in automotive technology and it is reached at alarming level. Because exhaust pollutants emitted to atmosphere by automobiles are the serious higienis and ...
  • Tomeze, Malek; Hasheesh, Mofleh (2017-05-31)
    Order has been increased rapidly for having efficient vehicles that is capable of to overcome the mountains and the rough roads. Since the available low structure vehicles will not face these obstacles; so in this project ...
  • الرجوب, انس علي (جامعة بوليتكنك فلسطين, 2015-05-01)
    تعد المراكز الثقافية جزءا لا يتجزأ من هوية الشعب الفلسطيني وتاريخه الحضاري فهي تجسد قيم المعرفة ، وتساهم في بناء شخصية الفرد وتنمي القيم الروحية والاخلاقية ، وتعمل على بناء قدرات المجتمع المحلي لإدارة الفعل الثقافي وتوظيفه ...
  • الرجوب, انس (Palestine Polytechnic University, 2015-05-30)
    تعد المراكز الثقافية جزءا لا يتجزأ من هوية الشعب الفلسطيني وتاريخه الحضاري فهي تجسد قيم المعرفة ، وتساهم في بناء شخصية الفرد وتنمي القيم الروحية والاخلاقية ، وتعمل على بناء قدرات المجتمع المحلي لإدارة الفعل الثقافي وتوظيفه ...
  • Abo-Hameada, Sana’; Ehmeadat, Fatima (Palestine Polytechnic University , college of engineering , environmental technology engineering, 2017-12)
    Wastewater (w.w) generated from Siniora meat processing industry contains relatively low concentrations of organic pollutants and other contaminants. The concentration of different parameters such as COD soluble, BOD, ...
  • Nassar, Abed Al-Hadee; Abu Saleh, Obaida (2015-05-31)
    The main purpose of the present study is the use of COMSOL Multiphysics software in the analysis of fuel cells. Two types of fuel cells are considered: Solid Oxide Fuel Cell (SOFC), and Proton Exchange Membrane Fuel Cell ...
  • Al-najjar, Diyala; Jamjom, Rinad; Ayaydeh, Haya (Palestine Polytechnic University , college of engineering , environmental technology engineering, 2016-05-31)
    The agricultural industry includes dairy, slaughterhouse, poultry and farms, is considered an important contributor to the national economy and GDP in Palestine. This projected aimed at investigation the best way of using ...
  • Ta'amra, Mu'min; Khalid, Obayda (Palestine Polytechnic University , mechanical engineering , mechatronics, 2017-05-31)
    One of the most important pillars of community development is to improve the healthcare section. This includes facilitating the access to medications and drugs for all people and over the time. However, many people still ...
  • Ismail, Mohammad; Shakhtour, Mohammad; Dadou, Ahmad (2017-05-31)
    Digitizing books and documents has become increasingly prevalent amongst libraries and university facilities as large data storage becomes cheaper and more available and physical storage space becomes scarce. There are ...
  • Saeed, Adham; Sarabtta, Tamer; Abu Zahra, Bilal (Palestine Polytechnic University, 2017-05-31)
    The amount of biomass waste is rabidly increasing worldwide. Besides, the energy demand is also increasing. Utilities biomass for production of biogas is one of the most promising methods for producing energy renewable ...
  • Zawahra, Abdullah; Turkman, Wasim (جامعة بوليتكنك فلسطين , كلية الهندسة , ميكانيك, 2017-05-31)
    The project mainly aims to take advantage of the thermal energy lost from the exhaust gases, through the utilization of this energy to generate electrical energy, these can be directly used to run electric tools or stored ...
  • Bader, Anwar; Shreef, Mutasem; Natashe, Hammam; Khalefa, Ismail; kha, Abdulrhmaan (جامعة بوليتكنك فلسطين , كلية الهندسة - مساحة, 2017-05-31)
    In accordance with the recommendations of the project supervisors, and the acceptance of all examining committee members, this project has been submitted to the Department of Civil and Architectural Engineering in the ...
  • Alama, Fadi (جامعة بوليتكنك فلسطين , كلية الهندسة , ميكانيك, 2015-05-31)
    Car accident is one of the most important problems, because sometimes the stories we took from the drivers couldn't determine the real cause of the accident, sometimes it is because one of the drivers, and in other times ...
  • Al-Shareef, Mothanna; Neiroukh, Mo'men (جامعة بوليتكنك فلسطين , كلية الهندسة , ميكانيك, 2015-05-31)
    Playing robots is good publicity for Mechatronics .First year student will be interested in Mechatronics after playing with robots and defeated by it. One of the playing robots is chess playing robot. The chess playing ...
  • Dwekat, Hadi Waddah (جامعة بوليتكنك فلسطين , كلية الهندسة , مساحة, 2016-06-01)
    This project aims to compare between the geodetic datum transformation method from WGS84 geocentric coordinate as measured using Global navigation sat system to the local coordinates system of Palestine (palestine_1923) The ...
  • Salman, Shareef; Amro, Laith (Palestine Polytechnic University, 2017-05-31)
    The auto world has become newly matched technology and programmatic development; modern cars are very similar in terms of external design and mechanical components. Several companies produce vehicles carrying the same ...
  • Salman, Shareef; Amro, Laith (جامعة بوليتكنك فلسطين , كلية الهندسة , ميكانيك, 2017-05-31)
    The auto world has become newly matched technology and programmatic development; modern cars are very similar in terms of external design and mechanical components. Several companies produce vehicles carrying the same ...
  • Alzeghari, Batoul; Torman, Rana; Qudimat, Yazan (Palestine Polytechnic University , electrical engineering, 2017-05-31)
    Photovoltaic inverter, that is the heart of PV systems, which is take (20 – 25)% total cost of PV system which is in charge of electric power conversion from DC to AC. Due to the multiplicity types of inverters, which ...
  • Alnazer, Khalilr; Abdeen, Laith; Alsharif, Faris; Abu-Rayyan, Salah (2017-05-31)
    Since computer numerical control machines have become important tool in manufacturing process, this project aims to design a computer numerical control machine for wood-working that helps wood workers to have their ...

Search DSpace


Browse

My Account