DSpace Repository

College of Engineering

College of Engineering

 

Recent Submissions

  • Assaf, Mostafa; Abo yabes, Dauod (Palestine Polytechnic University, 2017-05-31)
    Palestine needs to wind turbine compatible with the local weather and available wind speeds ,so we designed and built a small wind turbine meets this requirements and able to supply the most needed load in winter which ...
  • Saied, Ali; Rubaa, Belal; Al-Absi, Huthiefa; Abu-Hamdiay, Mohammed (جامعة بوليتكنك فلسطين , كلية الهندسة , ميكانيك, 2015-05-31)
    This project deals with the design of mechanical systems for Palestine Polytechnic University hospital , which consists of Nine stories with a total area of 20774 (m2). So that the hospital serves more than (100) thousand ...
  • عبید, محمد; داود, محمد; ابو ماضي, محمد; شكارنة, امیر (جامعة بوليتكنك فلسطين , كلية الهندسة , مساحة, 2017-05-31)
  • عجارمة, حسن; عواودة, یوسف; قزاز, نائل (جامعة بوليتكنك فلسطين , كلية الهندسة - مساحة, 2017-05-31)
  • Adawi, Mohammad; Sweity, Uddai; Alnazer, Zaid (جامعة بوليتكنك فلسطين , كلية الهندسة , ميكانيك, 2015-05-31)
    Design and building of a cascade refrigeration chamber with capacity of 30 litter operating at -65 oC, using R-23 and R-404a as refrigerants . This project can be considered as an implementation of the featured project ...
  • Rabbaa, Isra; Natsheh, Ziyad (جامعة بوليتكنك فلسطين , كلية الهندسة , ميكانيك, 2015-05-31)
    3D printer is a machine used to make three dimensional solid objects from a CAD “Computer Aided Design” models using additive manufacturing process where designed object divides into small layers then prints layer over ...
  • Thawabtah, Amer; Atbesheh, Yassen; Jarayseh, Eyad (جامعة بوليتكنك فلسطين , كلية الهندسة , ميكانيك, 2015-05-30)
    Energy sources such as natural gas or coal can be used to perform work. The work obtained by burning the sources, then the thermal energy resulted from burning gas can be converted to mechanical or electrical energy. These ...
  • النتشة, فراس; سيد احمد, شادي; العيدة, حاتم; قواسمه, امير (Palestine Polytechnic University, 2017-05-30)
    In this project, we will make a structural design of a residential and commercial Building. This building consists of many floors has a total area of approximately 6616.6 m2 . The project is designed mainly on ...
  • أمام, صهيب; دويك, ابراهيم; غيث, رأفت (Palestine Polytechnic University, 2017-05-30)
    The structural design of the buildings is very important, after finishing the work of the land survey, and architectural design, the structural design comes, which turn the architectural plans into reality, achieving the ...
  • رجبي, أحمد; السلايمة, عيد; البكري, اياد; كسبة, محمود (Palestine Polytechnic University, 2017-05-30)
    The Objective of the project can be summarized in the structural design of all structural elements contained in the project, slabs, beams, columns and foundations, walls and other structural elements. The design will be ...
  • عمرو, زكريا; حميدات, سماح; حريبات, ضياء\; شاهين, عمران; ابو شرخ, عيسى (Palestine Polytechnic University, 2017-05-30)
    -
  • ابو صافي, دعاء; جبارين, رشا; شلالدة, فهيمة; نصار, ولاء (Palestine Polytechnic University, 2017-05-30)
    يمكن تلخيص هدف المشروع في عمل التصميم الإنشائي لجميع العناصر الإنشائية التي يحتويها المشروع، من عقدات وجسور وأعمدة وأساسات وجدران وغيرها من العناصر الإنشائية. يتكون المشروع "A"""من مبنى خرساني يتكون من خمسة طوابق و المبنى ...
  • Qutiena, Qutiena; Mohammad, Drabe'e; Mahmoud, Jahshan; Mousa, Abo-Alhalawa (Palestine Polytechnic University, 2017-03-30)
    The idea of this project revolves around the architectural and Structural design of " Plant Biodiversity Research Center " in Al-arroub, which was selected after a study set of different architectural projects. The ...
  • Altamimi, Mohammad M; Iqnabi, Mohammad; Qdeimat, Moath (جامعة بوليتكنك فلسطين - كلية الهندسة - مباني, 2017-03-30)
    An exoskeleton (from Greek, (x) outer and (skeletos) skeleton) is the external skeleton that supports and empowers human body, A powered exoskeleton (also known powered armor, exocrine,hard-suit or Exosuit) is a wearable ...
  • Mashni, Ahmad; Adwan, Diya (جامعة بوليتكنك فلسطين - كلية الهندسة - مباني, 2017-05-31)
    The plastic products of industrial products that are indispensable, where is consumed significantly, it is used in many areas of daily life; therefore there is a need to produce a tremendous amount of these products. ...
  • Shoqier, Amjad; Halahla, Khaled; Wredat, Khaleel (جامعة بوليتكنك فلسطين - كلية الهندسة - مباني, 2017-05-31)
    "Design an Environmental Paper Recycling Machine for Heat Purpose" ______________________________________________________________________________ _______ In this project we designed a machine working on recycling ...
  • Makhamre, Basel; Abu Salama, Mahmoud (Palestine Polytechnic University, 2017-12-25)
    With industrial progress, resource consumption, scarcity of resources, and lack of resources, this is a great motivation to search for alternatives. These are sources of wood. Many industrial sectors consume wood in large ...
  • Shahateet, Anan; Eid, Bilal; Maraabeh, Moath (Palestine Polytechnic University, 2017-12-03)
    Industrial machine to close carton boxes automatically, as most factories in Hebron and Bethlehem are closing the boxes manually, so we designed this machine. This machine closes from 10 to 15 cartons per minute, ...
  • Zaitoun, Ibraheem; Al- Qawasme, Obadah (جامعة بوليتكنك فلسطين - كلية الهندسة - مباني, 2018-01-25)
    This project aims to produce a machine that minimizes the efforts required for the process of forming handmade local soap. As well as, increasing the quality of local soap to compete in the local and global markets. The ...
  • الرجوب, انس (Palestine Polytechnic University, 2015-05-30)
    تعد المراكز الثقافية جزءا لا يتجزأ من هوية الشعب الفلسطيني وتاريخه الحضاري فهي تجسد قيم المعرفة ، وتساهم في بناء شخصية الفرد وتنمي القيم الروحية والاخلاقية ، وتعمل على بناء قدرات المجتمع المحلي لإدارة الفعل الثقافي وتوظيفه ...

View more