DSpace Repository

Browsing by Title

Browsing by Title

Sort by: Order: Results:

  • Design And Implementation Of A Refrigerator Utilizing Solar Energy 
    Taqatqah, Mohammad; Noufal, Omar (جامعة بوليتكنك فلسطين - كلية الهندسة - ميكانيك, 2012-06-01)
    This project aims to design and build a refrigerator which will be used in remote areas The refrigerator volume and temperature will be estimated for small family food storage, and it consists of one suitable chamber ...
  • Design And Implementation of a Single Channel Transcutaneous Electrical Nerve Stimulator 
    Bannourah, Andria (جامعة بوليتكنك فلسطين - اتمتة صناعية, 2011-04-01)
    Transcutaneous electrical nerve stimulation is a treatment procedure that uses electric pulses to alleviate pain. Two pads are hooked up to the tens machine and are placed on the skin in strategic paths to intersect the ...
  • DESIGN AND IMPLEMENTATION OF A SOLAR PV MICROGRID: A CASE STUDY OF PALESTINE 
    Zaro, Fouad; Kiriakos, Ibrahim (International Journal of Engineering and Innovative Research, 2021-05-15)
    Microgrid is a power subsystem consist of small generators, storages and local loads. The attention to renewable resources and local generation is increasing for three important reasons: economics benefits, environmental ...
  • Design and Implementation of a Wearable Artificial Kidney Prototype for Home Dialysis 
    Salhab, Haya; Jabari, Raghda; Abu-Khriebah, Anwar (جامعة بوليتكنك فلسطين - اجهزة طبية, 2015-05-01)
    VI Abstract Hemodialysis is a life-preserving treatment for hundreds of thousands of patients with kidney failure. But the standard schedule of in-center HD three times a week is, at best, inconvenient, and at worst, ...
  • Design and Implementation of an Air Bubble Detector using an Ultrasound Principle with Audible Alarm 
    Shalaldeh, Haneen; Ideas, Rana (جامعة بوليتكنك فلسطين - اجهزة طبية, 2012-05-01)
    The idea of our project is to design an Air Bubble Detector by using the characteristics of the ultrasound sensor dependently on the transmitting and receiving signal which is passing through many stages that will give ...
  • Design and Implementation of an Automatic Sorting Machine 
    Abu Khalaf, Islam; Abu Arafeh, Murad (Palestine Polytechnic University (PPU) - mechatronics, 2018-01-01)
    Abstract Design and Implementation of Automatic Sorting Machine Sorting and recycling require fast and accurate processing. Millions of tons of scrap are processed each year moreover sorting scrap adds value at all ...
  • Design and Implementation of an Extruder Machine to Recycle Waste Plastics 
    Dana, Ashraf; Abu Khalaf, Yaziid (Palestine Polytechnic University - كلية الهندسة - ميكانيك, 2017-05-31)
    With increasing in global consumption and retreating of natural resistance, concern is growing over widespread plastic waste. Plastic waste threatens the environment when buried in landfills. Further, when such plastics ...
  • Design and Implementation of an Extruder Machine to Recycle Waste Plastics 
    Dana, Ashraf; Abu Khalaf, Yaziid (2017-05-01)
    T With increasing in global consumption and retreating of natural resistance, concern is growing over widespread plastic waste. Plastic waste threatens the environment when buried in landfills. Further, when such ...
  • Design and Implementation of an Optical System for Skin Treatment 
    Attoun, laila; Ebedo, Mai; Ahmad, Saeb (جامعة بوليتكنك فلسطين - اجهزة طبية, 2014-05-01)
    عدد المرضى الذين يعانون من االمراض الجلدية مثل الصدفية والبهاق يزدادون باستمرار .هناك العديد من التقنيات التي تستخدم لعالج مثل هذه االمراض الجلدية ومن اكثر التقنيات المستخدمه وافضلها هي التقنيات الضوئية التي تستخدم ...
  • Design and implementation of an SMS to email service 
    Tamimi, Asma; Rjoub, Salsabeel; Fakhori, Heba (جامعة بوليتكنك فلسطين - اتصالات, 2013-04-01)
    This project aims to provide two services , which are: SMS to email services , file to email service using GSM , GPRS and IP technologies. These services provide the user many choices in different cases , when there is a ...
  • Design and implementation of balance testing machin for grinding and cut-off wheels 
    Nofel, Mohammad; Alzear, Thaer (جامعة بوليتكنك فلسطين - كلية الهندسة - ميكانيك, 2009-06-01)
    cut off wheels and grinding discs are one of the most important tools ysed in the construction and industrial works, the discs available in different diameter and can be operated at different rotational speeds rang from ...
  • "Design and Implementation of Balance Testing Machine for Grinding and Cut-off Wheels " 
    Amayreh, Mohammad; Albakri, Mohammad (جامعة بوليتكنك فلسطين - كلية الهندسة - ميكانيك, 2010-06-01)
    In this project a device for measuring unbalance in cutoff and grinding wheels that are manufactured in the factory of JELANCO has been implemented successfully, in addition to determining the value of the unbalance in a ...
  • Design and implementation of broom sticks machine 
    Zamaereh, Salah; Omar Abu Danhash, Omar (Palestine Polytechnic University (PPU), 2018-12-01)
    Broom sticks are imported from abroad as there is no local manufacturer in Palestine.Import is expensive and consumption is high. However, there are technical problems such as curving the stick and the losing of threads ...
  • Design and implementation of CNC stone engraving machine 
    Qabajat, Muayad; Aljabari, Mokhtat (جامعة بوليتكنك فلسطين - اتمتة صناعية, 2013-05-01)
    This project discusses the CNC machines structure and its purpose of existence, and then it shows the designing and Implementing procedure of this machine starting from making a theoretical designation and selecting parts ...
  • Design and Implementation of Defibrillator analyzer 
    AbuRajab, Haneen; Shalaldeh, Sahar; Odeh, Sally (جامعة بوليتكنك فلسطين - اجهزة طبية, 2021-06-01)
    Defibrillator analyzer is one of the most important calibration devices that is specified to test quality and functionality of defibrillators, in order to avoid injuries that may occur to patient thus to a higher or a ...
  • Design And Implementation Of Electromechanical Arm 
    Halayqa, Alaa; Zhour, Talha; Zhour, Muin (جامعة بوليتكنك فلسطين - اتمتة صناعية, 2009-07-01)
    The electromechanical armis a design of transporting a plastic pipe through many stages of production , which depend on motion in three dimensions . the arm have two poewer system : electrical system of two induction motors ...
  • Design and Implementation of Gypsum Mixing Machine 
    Al-Sharif, Raed; Etkaidek, Mohammad; Ghannam, Ammar (جامعة بوليتكنك فلسطين - اتمتة صناعية, 2018-05-01)
    يهدف هذا المشروع للخروج بماكينة تعمل على خلط الجبص المحضر يدويا, لتقليل الجهد الالزم لعملية تحضير خليط الجبص وايضا زيادة القدرة االنتاجية وتوفير بيئة عمل صحية مناسبة للعامل وكذلك الحصول على خليط ذو جودة عالية وذلك من ...
  • Design and Implementation of Hearing Aid with Photovoltaic Charger 
    Imtera, Anwar; Hmedat, Samar (جامعة بوليتكنك فلسطين - اجهزة طبية, 2017-05-01)
    Due to various and increasing human medical needs and requirements in treatment of hearing problems , several techniques and application have been developed to facilitate dealing with different hearing problems. Hearing ...
  • Design And Implementation Of Mini-Wood Engraving Machine 
    Hijazi, Addei; Hroub, Mahdi (جامعة بوليتكنك فلسطين - اتمتة صناعية, 2011-01-01)
    this project discusses the cnc machines structure and its purpose of existence ........
  • Design and implementation of mixing and filling colors machine (MFCM) 
    Gusun, Alaa; Hassan, Firas; Al-Zeer, Mohammed (جامعة بوليتكنك فلسطين - اتمتة صناعية, 2009-06-01)
    This project presents design and implementation of color mixing and filling machine, which mixes the basic four colors with predetermined percentages in order to obtain large specter of colors at least 40 throughout applying ...

Search DSpace

Browse

My Account