DSpace Repository

Browsing by Title

Browsing by Title

Sort by: Order: Results:

  • Nassar, Abed Al-Hadee; Abu Saleh, Obaida (2015-05-31)
    The main purpose of the present study is the use of COMSOL Multiphysics software in the analysis of fuel cells. Two types of fuel cells are considered: Solid Oxide Fuel Cell (SOFC), and Proton Exchange Membrane Fuel Cell ...
  • Khaizaran, Zyiad (Journal of Cell and Animal Biology, 2014-05)
    Modern dairy cattle breeding strategies depend on linkage analysis and quantitative trait loci (QTL) of genes involved in milk yield and composition. This is because of their biological desired quantitative traits that ...
  • Al-Mohtaseb, Al-Montaser (Palestine Polytechnic University - Department of Computer science, 2015-06-01)
    The aim of this project is to build a software for the smart phones that can control the PCs, and keeps a lot of efforts and resources in using them. And this will be done by providing full access to the main resources of ...
  • Al-najjar, Diyala; Jamjom, Rinad; Ayaydeh, Haya (Palestine Polytechnic University , college of engineering , environmental technology engineering, 2016-05-31)
    The agricultural industry includes dairy, slaughterhouse, poultry and farms, is considered an important contributor to the national economy and GDP in Palestine. This projected aimed at investigation the best way of using ...
  • Taradeh, Qusai; Zabayna, Khaled; Arar, Salama; Shalalda, Mojahid; Abu -Raiya, Salim (Palestine Polytechnic University - كلية الهندسة - مباني, 2017-01-01)
    Structural design is the most important design of the building after the necessary of architectural design, the distribution of columns, loads, offer durability, the best prices and the highest degree of safety are the ...
  • Karama, Muneer Jebreel (2016)
    The aim of this paper is presenting new arithmetic progressions among squares i.e. more than three squares, moreover to introduce arithmetic progression of higher power.
  • Shehadeh, Karma; Tamimi, Mahmoud (Palestine Polytechnic University - طاقة, 2017-05-01)
    In order to ensure Stability and security of the power system , it's extremely important to detect , and locate different types of faults as fast as possible. This project is a framework of a protection system that ...
  • Baradhea, Shareef; Al-Janazreh, Adham; Sayaara, Abdalhadi (2011-12-01)
    في هذه الدراسة سوف نقوم باجراء دراسة وعملية مسح شامل لمنطقة من حيث دراسة درجة الحرارة الرطبة والجافة والرطوبة ونسبتها وقيمة المحتوى الحراري وسرعة الرياح بالاستناد الى دراسات سابقة ومن محطات الارصاد الجوية الممتدة في فلسطين ...
  • Al Qadi, Mohammed; Al Atawneh, Zeyad; Al Natsheh, Sufian (جامعة بوليتكنك فلسطين - كلية الهندسة - ميكانيك, 2010-12-01)
    The proposed graduation project addresses a major air pollution problem in Hebron city and mainly in a highly traffic dense road which is Al-Salam Road. The road connects the northern part of Hebron city with it southern ...
  • Thawabtih, Roa’a Muhammad (Palestine Polytehnic University & Bethlehem University, 2017-01-01)
    Background: Hair loss has significant psychological and social impacts on individuals affected with the disease and can cause considerable anxiety among family members. Atrichia with Papular Lesions (APL; Mendelian ...
  • Badrasawi, Manal (Brunei Darussalam Journal of Health;, 2014)
  • Tomizi, Manar; Mahareq, Tahani; Tomizi, Wijdan (Palestine Polytechnic University - IT, 2011-01-01)
    نتيجة للتقدم التكنولوجي, والتطور المستمر في استخدام الحاسوب في شتى مجالات الحياة وخاصة في مجال الرسم الحاسوبي كان لا بد من تطوير أساليب وأدوات جديدة تنسجم مع هذا التطور, لذلك لقد قمنا ببناء نظام يقوم بتوظيف تقنيات جديدة ...
  • Ta'amra, Mu'min; Khalid, Obayda (Palestine Polytechnic University , mechanical engineering , mechatronics, 2017-05-31)
    One of the most important pillars of community development is to improve the healthcare section. This includes facilitating the access to medications and drugs for all people and over the time. However, many people still ...
  • Abu Sabha, Sabha (جامعة بوليتكنك فلسطين - معلوماتية, 2016-05-31)
    Software development life cycle (SDLC) plays a signi cant role in building a good quality software. SDLC has six stages listed as follows: Requirement Analysis, Design, Development, Testing, and Maintenance. The success ...
  • Ismail, Mohammad; Shakhtour, Mohammad; Dadou, Ahmad (جامعة بوليتكنك فلسطين , كلية الهندسة , ميكانيك, 2017-05-31)
    Digitizing books and documents has become increasingly prevalent amongst libraries and university facilities as large data storage becomes cheaper and more available and physical storage space becomes scarce. There are ...
  • Abu Ayyash, Amani; Ghaith, Suzan; jabar, Thawra (جامعة بوليتكنك فلسطين - كلية الهندسة - مساحة, 2007-05-01)
    This project aims to evaluate the automatic generated DTM or DSM created by Photogrammetric workstations for chosen areas in Hebron, to evaluate the DTM heights ground surveyed points. Are used in addition, the differences ...
  • Yaghmour, Bahaa; Qwasmh, Sajed; Abuafifeh, Iyad (Palestine Polytechnic University (PPU) - mechatronics, 2018-01-01)
    This project considers design and building an automatic rebar bending machine to form stirrups with different dimensions and sizes. The machine is proposed to be accurate and precise with fast production rate, also it must ...
  • Bheas, Ismail; Jbour, Adnan; Al-Najjar, Moath; Al-salaiymeh (جامعة بوليتكنك فلسطين - كلية الهندسة - ميكانيك, 2004-06-01)
    This project deals with the production operations in one of the metal furniture production companies in Hebron (Taqaddom Scales Company), and a proposal for automating the handling system for one of its products (Shelving ...
  • Alhanini, Ahmad; Bader, Ihsan; Abu Arafeh, Abdullah (جامعة بوليتكنك فلسطين - كلية الهندسة - ميكانيك, 2012-04-01)
    يهدف المشروع بشكل اساسي لتقليل كمية استهلاك الوقود في المركبة وذلك من خلال استغلال الطاقة الحرارية الناتجه عن احتراق الوقود في المحرك في توليد طاقة كهربائية يمكن استغلالها لتشغيل الاجهزة الكهربائية في المركبة. وبذلك ...
  • Qasrawi, Anas; Natsheh, Yazeed (Palestine Polytechnic University (PPU) - mechatronics, 2018-01-01)
    This report presents the design and implementation of ball and plate system. The system consists of a plate, a touch screen and servo motors. The Touch screen is placed over the plate and the pate is moving by the servo ...

Search DSpace

Browse

My Account